Registro delle modifiche

• New BioAge feature.
• New Music Player feature.
• The HRV display has been changed from an hourly value to a daily value to show a sliding 3 months trend.
• New watch face "Fathoms".
• New green watch faces are now available.
• It is now possible to control the brightness during the night (from dusk till dawn).
• New always-on screen for running and standard GNSS activities (Cycling, car racing, etc.).
• It is now possible to use the time zone from your smartphone.
• The accuracy of HRV measurements was doubled due to a sample PPG data rate of 500 Hz instead of 250 Hz.
• The time zone information has been updated to account for time zone changes in Mexico.
• The average speed recognition has been improved.
• The charging screen was revised.
• SDNN and RMSSD values were added to HRV measurements (Apple Health and Android Health require HRV data in different formats. This change makes it possible for every company to receive the data it needs for their Health app).
• We added a new problem tracker to our watch firmware to track bugs that occur very rarely and cannot be reconstructed.
• The GNSS diagnosis screen now receives more data.
• Heart rate detection has been improved.
• Heart rate measurement has been improved for situations with frequent changes from little movement to a lot of movement.

Bugfixes:

• Time/Date changes are now applied instantly.
• The last speed for the activity "Flying" could be incorrect in some circumstances.
• Changes to the phone's time didn't always reflect on the watch.
• In some instances, the watch detected "not worn" although it was worn, thus not displaying a heart rate.
• Date sync has been improved.
• In some situations, the heart rate measurement did not start when the watch screen was turned on.
• Changing the alarm time on your watch did not change it in your app.
• In some instances, the firmware update file was not deleted after the update, prompting to update again on the next use.
• Under certain conditions, the watch could freeze on the "Please remove watch from the charger to turn it on" screen.
• If there was a GNSS connection, it was not possible to connect the watch with USB.
• If the display timeout for activities was set to "always on" in the app, this change was not transmitted to the watch.
• Changes to display brightness and time zone settings in the app were not applied to the watch.
• In some situations, a USB OTG connection triggered a reset of the watch.
• On the GPS-based Activity Idle screen, there were question marks.
• Certain conditions during an acceleration activity could lead to the watch restarting.
• The USB partition check was very slow.
• A scenario for unexpected restarts was removed.
• A factory reset did not remove HRV and BioAge data.
• If the acceleration screen was not closed but left by display timeout, the GNSS chip was not powered down, leading to very high battery consumption.
• If the battery level became critical during an acceleration activity, the watch became unresponsive.

• The connection time for chest straps was reduced.
• HR logging was enhanced.
• The total watch uptime is not displayed in power user mode.
• The BLE stability was improved.

Bugfixes:

• Even without GPS reception the watch saves Acceleration data.
• Under certain circumstances watch face changes in the app were not transmitted to the watch.
• In some situations the smartwatch displayed "Search for GPS" even when GPS already was at 100%.
• Time zone name translations were incorrect in some cases.
• In some situations the watch detected that it was not worn, although it was worn.
• The watch crashes and restarts when GPS is being searched while on acceleration screen.
• The watch showed notifications of disabled apps.

• New debug log to help customers who experience problems.
• The display hands now appear faster when turning on the screen.
• The watch hand for seconds was switched to Automatic mode.

Bugfixes:

• Power consumption with Display always-on was far too high.
• The screen layout on the accelerometer screen could break in certain situations.
• If the GPS signal is lost for more than 10 seconds the Acceleration measurement will be stopped.
• The Acceleration measurement could be wrong if it was started using the "Again" button

Bugfixes:

• At walking speed the distance covered was too high
• Improved BLE connection
• Training zones now have the correct abbrevation

New features:

- New watch face: SLOW"
- Countdown timer" feature
- New HR algorithm
- "Pause automatic display activation" feature

Bugfixes:

- Implementation of the newest version of our low-level BLE chip firmware from the hardware manufacturer
- In some situations, the BPM chart was not drawn correctly
- Under special circumstances, the watch stopped working when it was connected to a USB port while performing an HR/HRV measurement
- The user interface stopped working when certain conditions were met 
- In some situations, there were gaps in the 24-hour HR chart
- If you went to the map right after the start of an activity scrolling was not possible for 3 seconds
- The watch could hang when the sleep chart was opened when an HR recording was taken
- When the HR sensor got weak signals and the user was motionless the algorithm sometimes showed the watch as not worn. BLE was automatically turned off and notifications were not shown.
There was a gap in the HR chart as well
- The sync of a timezone change from the app could lead to the watch hanging if the watch was worn and there was no HR measurement in progress at the time of the sync.

New and changed functionality

- The Japanese user interface is now available
- New watch faces: "Sea" and "Clock" with several color options
- Faster recognition of heart rate chest strap for activities
- Battery endurance improvement for "display-on by hand move"

Bug fixes
- Fix for a bug that led to a fast battery drain under certain circumstances
- Optimized BLE connection
- Fix for a bug that could lead to not receiving notifications after having 32 unread notifications
- Fix for a bug that showed km/h in acceleration mode even when in an imperial region
- Watch face "Divo" missed a "Bugatti" text
- When watch is worn during night, watch might have turned on the display at some point in the night because for a brief period it thought it had not been worn
- In rare cases a power save action confused the battery monitor and led to a continuous vibration pattern as an error output of last resort
- In rare cases the entire HR chart of a day was missing on the watch display starting from UTC midnight, but was present in the app after sync  
- Fix for a bug that could lead to measurement data in different time zones within the app

- Software debounces of hardware buttons do not work in all possible timing cases. Sometimes the upper button also caused an action when releasing the button.
- In rare cases alarm was not triggered at the correct time but only after turning on the display again.
- Spurious watch restarts during activity
- Acceleration test leads to restart in some situations
Sometimes a background update of the FastGPS data caused repeated restarts of the watch during an activity.
- Watch displays wrong values when changing the timezone to location which is already on the next day
- For users with am/pm time format, the alarm Screen displayed "??" instead of am/pm
- Adapt calories consumption for several HR bands
- If the watch was reset to factory default while connected to the charger, the calculation of HR, steps, and calories only started after the watch was disconnected and reconnected to the charger again.
- If the time or time zone was updated via sync from the app while swiping between screens on the watch, the watch UI would sometimes get stuck.
- If the watch was connected to an Android device as a USB Flash drive, sometimes the Android system would leave the drive in a state that the watch's internal file system check and repair mechanism could not handle. This has been fixed.
- An error in the memory management has been found and fixed, that would sometimes cause a restart of the watch.
- Sometimes the eMMC flash memory device does not respond right away or in the expected fashion. If this happened, sometimes file operations e.g. for storing the HR chart history would get stuck and freeze the watch causing a restart.
- A race hazard between setting up the USB OTG screen background and the external host taking control of the USB OTG flash drive would sometimes lead to the background of the USB OTG screen being invisible.

Bugfixes:

• Apps user interface is lagging when the watch is synchronized
• Phone Timezone Incorrectly Displayed in App
• HRV-RMSSD chart is not displayed correctly
• Pairing Info Lost Alert Titane Lottie is wrong
• Old HRV Label and Date color is not correct
• App-Update screen english text must be updated

• Update logic for measurement data sync with data available notifications

Bugfixes:

• Music control close button doesn’t work
• Crash on sign out
• App crash during sync
• App Crashes Upon Entering Activity Detail Screen After Visiting Several Screens

• Apple Health Integration
• Add legend on activity map to explain the HR track colors
• Strava integration of laptiming and acceleration
• Optimize apple health sync trigger and authentication check place in code
• Apple Health Backup Data Monitoring
• Update timezone names

Bugfixes:

• Strava Heart Rate is not included when activity tracking data does not exist
• Frequent synchronization of activities
• Strava stops synchronization after some time

• New feature: Find my phone
• Improved Challenge result screen
• Improved activity heart rate zones
• Improved BLE sync
• Map annotations
• Improved BLE search
• Support for Bugatti Carbone Limited Edition
• Add Pause Auto Display On Watch Settings
  
  Bugfixes:
• Activities were not synced every two seconds on the dashboard
• On some devices the BLE connection could get stuck during the connection process when a new watch was added.
• Activity sharing: German umlaut "Ä" not displayed correctly
• On certain devices the sync could stop until BLE is turned off and on again
• Watch settings- app info button shouldn’t appear when there is no watch
• on the screen update screen the back button had to be clicked twice to actually go back
• When BLE is off, no warning appears

- The FAQs were implemented into the app.
- The activity sharing feature was implemented.
- A bug concerning the update screen was fixed.
- An issue where the second time zone was not shown correctly under certain circumstances was fixed.

New features:

- If a new watch firmware exists it will be transferred to your watch and if your watch is located on the charger at 03:00 am your watch firmware will be installed automatically.
- Auto-sync was optimized.
- In-app notifications now give detailed information about the watch and what the customer should do, when accomplishing different tasks.
- In the setting you can now choose "use system time zone" which will sync your watch to the time zone of your smartphone

Bugfixes:

- Sync stop somewhere during sync
- Dashboard is not triggered when you sign up via create account/privacy mode
- When you create an account, the app is stuck
- Small size iPhones’s watch setting scene has broken UI
- Firmware Update scene is stuck
- Save button are not visible on subpages of account
- the map upload scene in iPhone 7 has broken UI
- Weekday in details display wrong
- location update too often
- Sync data is missing
- Email was empty and not editable when trying to change the email
- Sync needs multiple executions to sync HR/HRV
- Sync stop somewhere during sync
- Firmware upload waits 30s at the end of the upload

- Update autosync
- Show update alert on support screen
- sync does not block the firmware update
- kcal history in app did not match data from watch in some cases
- sleep time was not matching with watch in some cases
- Google Sign-in crash was fixed

Bugfixes:

• Suspicious crash when you navigate through out the application (Memory leak)
• FastGps current location is not updated in the background
• Crashlytics ChartComponent.convertHRVData
• HRV-RMSSD chart is not displayed correctly
• Crashlytics BaseMapUploadService startMapConfigMigration
• Pairing info lost alert titan Lottie is wrong
• App-Update screen english text must be updated

• Fix notification filter

Bugfixes:

• Acceleration activities with invalid fields can not be parsed
• Sync status not animating during sync
• Bioage Fatal Exception: java.util.NoSuchElementException
• Old HRV Label and Date color is not correct

- The FAQs were implemented into the app.
- The activity sharing feature was implemented.
- A bug concerning the font size on scaled screens has been fixed.
- An issue where the HR and HRV chart might have missed some data under certain circumstances was fixed.

Bugfixes:

- Connection icon has gone
- FastGPS is not triggered in backgroud
- Can not enter the support scene when there is no internet
- Syncronization is not possible
- User settings pending icon is not leaving
- Support Images rotation is not correct
- Sync is not possible until reconnecting watch
- Caller name not visible in notifications
- Show notification permission missing alert
- Sleep is not matching with the watch
- Corrupted Reg/Stress graph
- Initial cable connection cause no watch
- Could not set connection via BLE in Android 9
- The app does not tell the user that sync is not possible during USB OTG session

- Migliorata la connessione BLE
- Quando il cavo veniva scollegato dall'orologio, continuava ad essere indicato "collegato via cavo"
- Le dimensioni dei caratteri non erano corrette in alcune schermate
- Mostrare l'avviso di aggiornamento nella schermata di supporto
- Impostare la finestra temporale di sincronizzazione

- Upgrade watch protocol to 1.1.0 (preparation for firmware update 1.1.3)
- Add a timezone changed watch does not displaying the correct cities on details screen
- Activities are not listed correctly
- If the notification access permission is granted before adding a watch, the incoming call is not working
- Dasboard sync refresh is not working correctly.
- Sync date is not displaying correctly
- "Google Sign in" does not work correctly in certain situations
- Paired watch cable connection is not successful
- BUGATTI directory does not appear at the file system on some smartphones.
- Certain app crashes were repaired
- Map does not work in dark theme
- Data on the app is not matching the watch data on some smartphones
- Optimizations in the firmware update process
- Better stability
- Better BLE connection

- Always read device info when reconnecting
- Data sync improved
- Certain app crashed were repaired
- “Walking” activity type showed pace instead of km/h
-  Automatic sync only syncs small part of the data
- Navigation after cable connection is not correct
- Cable connection is not functional on some devices
-  Do not send notification to watch on outgoing call by user from his own phone
-  BUGATTI Logo dissappers in Pixel 5 API 3
- Unable to give permission to access the folder “Bugatti”
- Update autosync
-  Update decimal places
-  Notification about missed phone call does not contain caller info
- Upgraded BLE permissions on Android 1
- Add Phone Permission to permission screen
- Force start measurement sync if the app goes from background to foreground
-  Change try and last sync delay time
-  Navigate to missing permission screen if permission is missing
- Improved BLE connections
- Imrpoved stability

- increased stability
- optimized sync process for Android 11 (for Android 12 it will come in the next update)
- optimized map download process
- Fast GPS label could be wrong
- Giving your map a name did not work in some situations
- the keyboard was not closed when clicking on the empty field in giving the map a name
- Map upload stopped when screen was locked
- The map selection from the app now has a 10 km bigger radius