Changelog

• New BioAge feature.
• New Music Player feature.
• The HRV display has been changed from an hourly value to a daily value to show a sliding 3 months trend.
• New watch face "Fathoms".
• New green watch faces are now available.
• It is now possible to control the brightness during the night (from dusk till dawn).
• New always-on screen for running and standard GNSS activities (Cycling, car racing, etc.).
• It is now possible to use the time zone from your smartphone.
• The accuracy of HRV measurements was doubled due to a sample PPG data rate of 500 Hz instead of 250 Hz.
• The time zone information has been updated to account for time zone changes in Mexico.
• The average speed recognition has been improved.
• The charging screen was revised.
• SDNN and RMSSD values were added to HRV measurements (Apple Health and Android Health require HRV data in different formats. This change makes it possible for every company to receive the data it needs for their Health app).
• We added a new problem tracker to our watch firmware to track bugs that occur very rarely and cannot be reconstructed.
• The GNSS diagnosis screen now receives more data.
• Heart rate detection has been improved.
• Heart rate measurement has been improved for situations with frequent changes from little movement to a lot of movement.

Bugfixes:

• Time/Date changes are now applied instantly.
• The last speed for the activity "Flying" could be incorrect in some circumstances.
• Changes to the phone's time didn't always reflect on the watch.
• In some instances, the watch detected "not worn" although it was worn, thus not displaying a heart rate.
• Date sync has been improved.
• In some situations, the heart rate measurement did not start when the watch screen was turned on.
• Changing the alarm time on your watch did not change it in your app.
• In some instances, the firmware update file was not deleted after the update, prompting to update again on the next use.
• Under certain conditions, the watch could freeze on the "Please remove watch from the charger to turn it on" screen.
• If there was a GNSS connection, it was not possible to connect the watch with USB.
• If the display timeout for activities was set to "always on" in the app, this change was not transmitted to the watch.
• Changes to display brightness and time zone settings in the app were not applied to the watch.
• In some situations, a USB OTG connection triggered a reset of the watch.
• On the GPS-based Activity Idle screen, there were question marks.
• Certain conditions during an acceleration activity could lead to the watch restarting.
• The USB partition check was very slow.
• A scenario for unexpected restarts was removed.
• A factory reset did not remove HRV and BioAge data.
• If the acceleration screen was not closed but left by display timeout, the GNSS chip was not powered down, leading to very high battery consumption.
• If the battery level became critical during an acceleration activity, the watch became unresponsive.

• The connection time for chest straps was reduced.
• HR logging was enhanced.
• The total watch uptime is not displayed in power user mode.
• The BLE stability was improved.

Bugfixes:

• Even without GPS reception the watch saves Acceleration data.
• Under certain circumstances watch face changes in the app were not transmitted to the watch.
• In some situations the smartwatch displayed "Search for GPS" even when GPS already was at 100%.
• Time zone name translations were incorrect in some cases.
• In some situations the watch detected that it was not worn, although it was worn.
• The watch crashes and restarts when GPS is being searched while on acceleration screen.
• The watch showed notifications of disabled apps.

• New debug log to help customers who experience problems.
• The display hands now appear faster when turning on the screen.
• The watch hand for seconds was switched to Automatic mode.

Bugfixes:

• Power consumption with Display always-on was far too high.
• The screen layout on the accelerometer screen could break in certain situations.
• If the GPS signal is lost for more than 10 seconds the Acceleration measurement will be stopped.
• The Acceleration measurement could be wrong if it was started using the "Again" button

• New feature: Find my Phone
• Updated feature: Challenge Mode
• Updated feature: Acceleration
• New watch face: World Timer
• The alarm now indicates the current time, instead of the alarm time
• Heart rate training zones in activities were improved

Bugfixes:

• At walking speed the distance covered was too high
• Improved BLE connection
• Training zones now have the correct abbrevation

New features:

- New watch face: SLOW"
- Countdown timer" feature
- New HR algorithm
- "Pause automatic display activation" feature

Bugfixes:

- Implementation of the newest version of our low-level BLE chip firmware from the hardware manufacturer
- In some situations, the BPM chart was not drawn correctly
- Under special circumstances, the watch stopped working when it was connected to a USB port while performing an HR/HRV measurement
- The user interface stopped working when certain conditions were met 
- In some situations, there were gaps in the 24-hour HR chart
- If you went to the map right after the start of an activity scrolling was not possible for 3 seconds
- The watch could hang when the sleep chart was opened when an HR recording was taken
- When the HR sensor got weak signals and the user was motionless the algorithm sometimes showed the watch as not worn. BLE was automatically turned off and notifications were not shown.
There was a gap in the HR chart as well
- The sync of a timezone change from the app could lead to the watch hanging if the watch was worn and there was no HR measurement in progress at the time of the sync.

New and changed functionality

- The Japanese user interface is now available
- New watch faces: "Sea" and "Clock" with several color options
- Faster recognition of heart rate chest strap for activities
- Battery endurance improvement for "display-on by hand move"

Bug fixes
- Fix for a bug that led to a fast battery drain under certain circumstances
- Optimized BLE connection
- Fix for a bug that could lead to not receiving notifications after having 32 unread notifications
- Fix for a bug that showed km/h in acceleration mode even when in an imperial region
- Watch face "Divo" missed a "Bugatti" text
- When watch is worn during night, watch might have turned on the display at some point in the night because for a brief period it thought it had not been worn
- In rare cases a power save action confused the battery monitor and led to a continuous vibration pattern as an error output of last resort
- In rare cases the entire HR chart of a day was missing on the watch display starting from UTC midnight, but was present in the app after sync  
- Fix for a bug that could lead to measurement data in different time zones within the app

Features

- The Always-on display is now available
- Japanese signs are now supported in notifications
- Language-specific characters are supported for numerous languages (Polish, Hungarian, Turkish,…)
- With the upper button you can now switch between Always-on display, Full power display, and display off when selecting the Always-on display
- We implemented two more energy-saving features. The watch now needs less energy when the display is on due to more efficient power management (battery lasts longer when the display is used) and the CPU speed is now adapted to the specific situation (battery lasts longer when the display is not used)
- Double-tap to wake is now available in Always-on mode- The watch face selection was changed. You can now swipe through the major designs and change the color of the variants by clicking on the screen
- A new screen was added to non GPS activities (AR02d)
- If there is a new firmware update on the watch and it’s 3 o’clock in the morning and your watch is on the charger the new firmware will be installed automatically.
- There is a new activity screen for always-on mode when the display timeout time is reached (this way you can save battery during an activity by reducing the display timeout time in activity mode.
- The GPS data quality was improved by using GPS, Glonass, and Galileo satellites at the same time
- During the activity the current GPS reception is shown on the first screen

Bugs
- Wrong battery level was displayed after taking the watch from the charger
- We solved several bugs that in rare cases lead to things like showing different cities in the overview on your smartphone, steps not being counted, and then being massively overcounted.
- We solved several bugs that could lead to the watch being stuck for a moment
- We solved a bug that could create problems when connecting your watch to a Mac and connecting it to your smartphone within a short period of time
- We solved a bug that could freeze the user interface in rare cases.
- We solved a bug in the firmware update process.
- We solved a bug that could lead to a massive energy consumption after finishing a Challenge mode activity (the GNSS unit did not power down correctly)
- We solved a bug that caused the GNSS unit to not stop after doing an activity or navigating on one of the activity screens
- We solved a bug that could lead to a deadlock when the USB connection was interrupted
- We solved a bug that could lead to a restart of the watch
- We solved a bug that made it impossible to charge to more than 80% on some watch faces
- We solved a bug that could lead to the watch turning the display on during the night because it falsely detected that the watch was not worn and then a few seconds later detected that the watch was worn again.
- We solved a bug that caused the BLE module to be turned off when the watch was not worn, although the display was on.

Changes
- The Chrono watch face is now the first in the watch face selection
- Always-on mode deactivates itself if the charging level falls below 5%
- A warning was added when display always on is selected (reduced battery time)
- The car from the car trip icon was replaced by a more modern version

- Software debounces of hardware buttons do not work in all possible timing cases. Sometimes the upper button also caused an action when releasing the button.
- In rare cases alarm was not triggered at the correct time but only after turning on the display again.
- Spurious watch restarts during activity
- Acceleration test leads to restart in some situations
Sometimes a background update of the FastGPS data caused repeated restarts of the watch during an activity.
- Watch displays wrong values when changing the timezone to location which is already on the next day
- For users with am/pm time format, the alarm Screen displayed "??" instead of am/pm
- Adapt calories consumption for several HR bands
- If the watch was reset to factory default while connected to the charger, the calculation of HR, steps, and calories only started after the watch was disconnected and reconnected to the charger again.
- If the time or time zone was updated via sync from the app while swiping between screens on the watch, the watch UI would sometimes get stuck.
- If the watch was connected to an Android device as a USB Flash drive, sometimes the Android system would leave the drive in a state that the watch's internal file system check and repair mechanism could not handle. This has been fixed.
- An error in the memory management has been found and fixed, that would sometimes cause a restart of the watch.
- Sometimes the eMMC flash memory device does not respond right away or in the expected fashion. If this happened, sometimes file operations e.g. for storing the HR chart history would get stuck and freeze the watch causing a restart.
- A race hazard between setting up the USB OTG screen background and the external host taking control of the USB OTG flash drive would sometimes lead to the background of the USB OTG screen being invisible.

- When the first initialization is performed in the app while not having a connection to the watch it could happen that the setup wasn't performed correctly.

- Under certain circumstances, the HR measurement was not started for the activities of Badminton Indoor, and Yoga.
- When navigating back from a submenu you were brought to the beginning of this list instead of the part where you entered the sub-menu.
- The karate activity could not be started.
- Several consecutive BLE commands to start a firmware update could require a restart of the watch.
- While the watch was on the charger, generating a calculated basal metabolic rate of calories did not work.
- Stability improvement.
- BLE connection improvement.
- When switching between display contents continuously, a part of the required memory was only released after the display was turned off. Therefore, it was not possible to switch between display contents for an arbitrary amount of time without turning off the display.

• Change the activity threshold to 10 minutes of activity per hour to color the bars (kcal, dehydration).
• Update FastGPS validation date and update date
• Improve storage service (timezone data)

Bugfixes:

• Apps user interface is lagging when the watch is synchronized
• Phone Timezone Incorrectly Displayed in App
• HRV-RMSSD chart is not displayed correctly
• Pairing Info Lost Alert Titane Lottie is wrong
• Old HRV Label and Date color is not correct
• App-Update screen english text must be updated

• Update logic for measurement data sync with data available notifications

Bugfixes:

• Music control close button doesn’t work
• Crash on sign out
• App crash during sync
• App Crashes Upon Entering Activity Detail Screen After Visiting Several Screens

• Apple Health Integration
• Add legend on activity map to explain the HR track colors
• Strava integration of laptiming and acceleration
• Optimize apple health sync trigger and authentication check place in code
• Apple Health Backup Data Monitoring
• Update timezone names

Bugfixes:

• Strava Heart Rate is not included when activity tracking data does not exist
• Frequent synchronization of activities
• Strava stops synchronization after some time

• New feature: Find my phone
• Improved Challenge result screen
• Improved activity heart rate zones
• Improved BLE sync
• Map annotations
• Improved BLE search
• Support for Bugatti Carbone Limited Edition
• Add Pause Auto Display On Watch Settings
  
  Bugfixes:
• Activities were not synced every two seconds on the dashboard
• On some devices the BLE connection could get stuck during the connection process when a new watch was added.
• Activity sharing: German umlaut "Ä" not displayed correctly
• On certain devices the sync could stop until BLE is turned off and on again
• Watch settings- app info button shouldn’t appear when there is no watch
• on the screen update screen the back button had to be clicked twice to actually go back
• When BLE is off, no warning appears

- The FAQs were implemented into the app.
- The activity sharing feature was implemented.
- A bug concerning the update screen was fixed.
- An issue where the second time zone was not shown correctly under certain circumstances was fixed.

- The Strava integration was implemented.
- The backup feature was implemented.

- we fixed a problem that could lead to a very short battery runtime.
- We fixed a problem in the BPM chart.
- We fixed an error that let the app crash.

New features:

- If a new watch firmware exists it will be transferred to your watch and if your watch is located on the charger at 03:00 am your watch firmware will be installed automatically.
- Auto-sync was optimized.
- In-app notifications now give detailed information about the watch and what the customer should do, when accomplishing different tasks.
- In the setting you can now choose "use system time zone" which will sync your watch to the time zone of your smartphone

Bugfixes:

- Sync stop somewhere during sync
- Dashboard is not triggered when you sign up via create account/privacy mode
- When you create an account, the app is stuck
- Small size iPhones’s watch setting scene has broken UI
- Firmware Update scene is stuck
- Save button are not visible on subpages of account
- the map upload scene in iPhone 7 has broken UI
- Weekday in details display wrong
- location update too often
- Sync data is missing
- Email was empty and not editable when trying to change the email
- Sync needs multiple executions to sync HR/HRV
- Sync stop somewhere during sync
- Firmware upload waits 30s at the end of the upload

- Update autosync
- Show update alert on support screen
- sync does not block the firmware update
- kcal history in app did not match data from watch in some cases
- sleep time was not matching with watch in some cases
- Google Sign-in crash was fixed

- Upgrade watch protocol to 1.1.0 (preparation for firmware update 1.1.4)
- Bug with reg/stress and average BPM display was solved
- a bug that lead to a crash that happened on the account page was solved
- Update instructions were updated
- The map upload feature was improved
- BPM and HRV were not correctly displayed on the phone
- During the communication between the watch and the phone a timezone bug could happen
- The app could crash during a sync in certain situations
- The backup animation on the backup import screen had a glitch
- When the internet connection during the upload process was lost an error occurred
- Map file size was only visible in GB, not in MB
- Average BPM values in the activities and training report screen did not match
- Deleting an activity did not update the training report
- The activity info boxes were updates
- Sleep charts are not shown in the correct timezone in certain cases
- The summary is using the UTC timestamp instead of local time
- The permission status list is added to the support file
- We added information that cable sync and map upload are only available on iOS 14 or newer

• Optimize music player status in pause mode
• Change the activity threshold to 10 minutes of activity per hour to color the bars (kcal, dehydration).
• Update FastGPS validation date and update date
• Sync and send extended log data from watch in support request

Bugfixes:

• Suspicious crash when you navigate through out the application (Memory leak)
• FastGps current location is not updated in the background
• Crashlytics ChartComponent.convertHRVData
• HRV-RMSSD chart is not displayed correctly
• Crashlytics BaseMapUploadService startMapConfigMigration
• Pairing info lost alert titan Lottie is wrong
• App-Update screen english text must be updated

• Fix notification filter

Bugfixes:

• Acceleration activities with invalid fields can not be parsed
• Sync status not animating during sync
• Bioage Fatal Exception: java.util.NoSuchElementException
• Old HRV Label and Date color is not correct

• Improve activity screen performance

Bugfixes:

• App crashed in map upload
• App crashes when sharing long duration activity
• Software Update screen “What’s new?” still appears
• The positions of the y-axis labels in the line chart are not correct
• Inconsistent Activity Tracking between Smartwatch and Phone
• Map upload doesn’t resume after internet connection is lost
• Crashlytics | Training report view model
• Crashlytics | Notification Toast
• Crashlytics | Strava host exception
• Crashlytics | ActivityDetailsInteractor NullPointerException
• Crashlytics | NotSeriazableException -ActivityPositionTrackingSourceDataModel
• Crashlytics | IllegalArgumentException Navigation
• Crashlytics | IllegalArgumentException ManageMAp
• Background is not triggered
• although the watch is carbon, image of the watch is ceramique in the map upload screen
• After killing the app in the connection scene, the app is crashing

• New feature: Find my phone
• Improved Challenge result screen
• Improved activity heart rate zones
• Improved BLE sync
• Map annotations
• Improved BLE search
• Support for Bugatti Carbone Limited Edition
• New waiting screen for Map uploads
• Connect by cable workflow was updated
• Add Pause Auto Display On Watch Settings
  
  Bugfixes:
• Under certain circumstances the watch was removed from the list of bound devices
• After importing a backup it could happen that the calories from the last day were slightly off
• The Facebook Messenger missed called notification could have appeared twice
• On some devices the BLE connection could get stuck during the connection process.
• On a Samsung Galaxy A53 the watch icon lottie animation on the dashboard could get stuck.
• Watch searching duration was updated
• On certain devices the sync could stop until BLE is turned off and on again
• There was no warning, when BLE was off when connecting the watch
• on the screen update screen the back button had to be clicked twice to actually go back
• Software update BLE option appear and disappear suddenly when cable is disconnected
• Sharing screens- Edit changes are discarded when changed from dark to light (vice versa)
• Software Update upload stops when dark/light mode changes are applied
• Sometimes Whatsapp calls were not displaying on the watch

- The FAQs were implemented into the app.
- The activity sharing feature was implemented.
- A bug concerning the font size on scaled screens has been fixed.
- An issue where the HR and HRV chart might have missed some data under certain circumstances was fixed.

- The Strava integration was published
- The backup feature was implemented
- The stability of the map upload process was improved
- Notifications on several rare devices were improved

New features:

- If a new watch firmware exists it will be transferred to your watch and if your watch is located on the charger at 03:00 am your watch firmware will be installed automatically.
- Auto-sync was optimized.
- In-app notifications now give detailed information about the watch and what the customer should do, when accomplishing different tasks.

Bugfixes:

- Connection icon has gone
- FastGPS is not triggered in backgroud
- Can not enter the support scene when there is no internet
- Syncronization is not possible
- User settings pending icon is not leaving
- Support Images rotation is not correct
- Sync is not possible until reconnecting watch
- Caller name not visible in notifications
- Show notification permission missing alert
- Sleep is not matching with the watch
- Corrupted Reg/Stress graph
- Initial cable connection cause no watch
- Could not set connection via BLE in Android 9
- The app does not tell the user that sync is not possible during USB OTG session

- Improved BLE connection
- When the cable was disconnected from the watch, it still said "connected by cable"
- Font Sizes were not correct on some screen
- Show update alert on support screen
- Set up synchronisation time window

- Upgrade watch protocol to 1.1.0 (preparation for firmware update 1.1.3)
- Add a timezone changed watch does not displaying the correct cities on details screen
- Activities are not listed correctly
- If the notification access permission is granted before adding a watch, the incoming call is not working
- Dasboard sync refresh is not working correctly.
- Sync date is not displaying correctly
- "Google Sign in" does not work correctly in certain situations
- Paired watch cable connection is not successful
- BUGATTI directory does not appear at the file system on some smartphones.
- Certain app crashes were repaired
- Map does not work in dark theme
- Data on the app is not matching the watch data on some smartphones
- Optimizations in the firmware update process
- Better stability
- Better BLE connection

- Always read device info when reconnecting
- Data sync improved
- Certain app crashed were repaired
- “Walking” activity type showed pace instead of km/h
-  Automatic sync only syncs small part of the data
- Navigation after cable connection is not correct
- Cable connection is not functional on some devices
-  Do not send notification to watch on outgoing call by user from his own phone
-  BUGATTI Logo dissappers in Pixel 5 API 3
- Unable to give permission to access the folder “Bugatti”
- Update autosync
-  Update decimal places
-  Notification about missed phone call does not contain caller info
- Upgraded BLE permissions on Android 1
- Add Phone Permission to permission screen
- Force start measurement sync if the app goes from background to foreground
-  Change try and last sync delay time
-  Navigate to missing permission screen if permission is missing
- Improved BLE connections
- Imrpoved stability

- increased stability
- optimized sync process for Android 11 (for Android 12 it will come in the next update)
- optimized map download process
- Fast GPS label could be wrong
- Giving your map a name did not work in some situations
- the keyboard was not closed when clicking on the empty field in giving the map a name
- Map upload stopped when screen was locked
- The map selection from the app now has a 10 km bigger radius